Professor
Prof. Mohammad Rofiqul Islam received his B.Sc. & M.Sc. in Mechanical Engineering from Rajshahi University of Engineering & Technology (RUET) and PhD from Kitami Institute of Technology, Japan. He also worked as JSPS postdoctoral research fellow in Japan for two years. He is now serving as a Professor in Mechanical Engineering of RUET. The major contribution of his research is the production of solid, liquid and gaseous fuels from organic solid wastes by thermal treatment (pyrolysis technology) and utilization them as alternative to conventional fuels; management of solid wastes; energy efficiency; improvement of energy efficiency of submersible pumping system, solar irrigation; and other renewable energy engineering. His research findings have been published in 40 different journals and also he presented the results in 31 international conferences held in Australia, Bangladesh, Italy, Japan, and USA.
Institute of Energy and Environmental Studies
Rajshahi University of Engineering & Technology
Mechanical Engineering
Rajshahi University of Engineering & Technology
Mechanical Engineering
Rajshahi University of Engineering & Technology
Materials Science & Engineering
Rajshahi University of Engineering & Technology
Chemical and Food Process Engineering
Rajshahi University of Engineering & Technology
Mechanical Engineering
Rajshahi University of Engineering & Technology
Mechanical Engineering
Rajshahi University of Engineering & Technology
Mechanical Engineering
Rajshahi University of Engineering & Technology
Mechanical Engineering
Rajshahi University of Engineering & Technology
National University Corporation Kitami Institute of Technology, Japan
National University Corporation Kitami Institute of Technology, Japan
Rajshahi University of Engineering & Technology
Rajshahi University of Engineering & Technology
| SL | Authors | Title | Publisher Details | Publication Year | Type |
| 1 | Islam, M. R., Parveen, M., Rahman, M. S., Ferdous, J., Kader, M. A., & Takai, K. | Thermochemical conversion of cedar wood by pyrolysis technology for bio-oil | Biofuels, 1-9 | 2023 | Journal |
| 2 | Hossain, M.S., Islam, M.R., Das, A., Himel, H.H., Das, B. K., Roy, T. K., & Hasan, M. S. | An energy-efficient pumping system for sustainable cities and society: Optimization, mathematical modelling, and impact assessment | Energy Reports, 10 (2023), 819-836 | 2023 | Journal |
| 3 | Hossain, M. S., Haque, M. E., Islam, M. R., & Himel, M. H. H. | Energy consumption behavior analysis and experimental investigation of a novel technique for energy-efficient operation of submersible pumping system used in Barind Tract of Bangladesh. | Energy Efficiency, 16(2), (2023) | 2023 | Book |
| 4 | Hossain, M. S., Shozib, I. A., Das, B. K., Hossain, M. S., Das, A., Islam, M. R., Kulsuma, M. | Characterization, performance assessment, techno-economic potential, and process optimization of scrap tire pyrolysis in Bangladesh. | Journal of Cleaner Production (2023) | 2023 | Journal |
| 5 | Hossain, M. S., Das, B. K., & Islam, M. R. | Energy generation and techno-economic potential assessment of anaerobic co-digestion of cow dung with food waste in Bangladesh. | International Conference on Nano-Bio and Advanced Materials Engineering 7-8 January 2023, Cox’s Bazar, Bangladesh, | 2023 | Conference |
| 6 | Hossain, M. S., Shozib, I. A., & Islam, M. R. | Comparative study of thermal degradation kinetics of two woody biomass samples for bio-oil production | Sustainable Energy Technologies and Assessments, 52 (2022) 102158 | 2022 | Journal |
| 7 | A. B. Islam, S. B. Islam, M. R. Islam, M. S. Hossain. | Field Level Study of Solar PV Powered Irrigation Systems in Bangladesh. | 4th International conference on energy and power (ICEP 2022), MIST, Dhaka, Bangladesh; 11-13 December, 2022. | 2022 | Conference |
| 8 | M. S. Hossain, A. B. Islam, S. B. Islam, M. R. Islam, N. N. Mustafi | Comparative study of conversion performance for three groups of solid wastes into biofuels and chemicals by co-pyrolysis technology | 4th International conference on energy and power (ICEP 2022), MIST, Dhaka, Bangladesh; 11-13 December, 2022. | 2022 | Conference |
| 9 | Hossain, M. S., Islam, M. R., Roy, T. K., Mallik, N. I., & Himel | Energy Consumption Behavior Analysis and Investigation of Submersible Pumping System Efficiency in Different Bore well at Rajshahi Division of Bangladesh. | International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE 2022), 25-27 June, 2022. | 2022 | Conference |
| 10 | Hossain, M. S., Das, B. K., Islam, M. R., Roy, T. K., & Bhowmik, S., Riad, M. I., Nuhash, S. S., & Paul, S. | Energy, Economic, and Environmental benefit Analysis of organic fraction of MSW through anaerobic digestion technology in Bangladesh. | International Conference on Mechanical, Industrial and Energy Engineering, 22-24 December 2022, Khulna, BANGLADESH. | 2022 | Conference |
| 11 | S. Golder, M.R. Islam, R. Narayanan, S. Golder, M.A. Gafur, R. Pippia, S.K. Tyagi | Comparative study of thermal degradation kinetics of two woody biomass samples for bio-oil production | Sustainable Energy Technologies and Assessments, 52 (2022) 102158. | 2022 | Journal |
| 12 | Energy Sources; Part A: Recovery, Utilization and Environmental Effects, 1–13, (2021) | Production and physicochemical properties analysis of co-pyrolytic oil derived from scrap tires and sawdust. | Hossain, M. S., Shozib, I. A., & Islam, M. R. | 2021 | Journal |
| 13 | Hossain, M. S., Islam, M. R., Himel, M. H. H., Hasan, M. S., Roy, T. K., & M. N. I. | Performance Investigation of Submersible Pumping System. | International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021) 12 – 14 December 2021, Chattogram, Bangladesh. | 2021 | Conference |
| 14 | M. K. Islam, M. S. Khatun, Md, M. A. Arefin, M. R. Islam, M. Hassan | Waste to energy: An experimental study of utilizing the agricultural residue, MSW, and e-waste available in Bangladesh for pyrolysis conversion | Heliyon 7 (2021) e08530 | 2021 | Journal |
| 15 | S. Golder, R. Narayanan, M. R. Hossain, M. R. Islam | Experimental and CFD investigation on the application for aerogel insulation in buildings | . Energies 2021, 14, 3310 | 2021 | Journal |
| 16 | . E. Haque, M. S. Islam, M. R. Islam, H. Haniu, M. S. Akhter | Energy efficiency improvement of submersible pumps using in Barind area of Bangladesh | Energy Procedia, ELSEVIER, 160 (2019), pp 123 – 130. | 2019 | Journal |
| 17 | M. S. Hossain, J. Ferdous, M. S. Islam, M. R. Islam | N. N. Mustafi, H. Haniu. Production of liquid fuel from co-pyrolysis of polythene waste and rice straw. | Energy Procedia, ELSEVIER, 160 (2019), pp 116 – 122. | 2019 | Journal |
| 18 | M E Haque, M R Islam, M S Islam, H Haniu, M S Akhter | Life cycle cost and energy consumption behavior of submersible pumps using in the Barind area of Bangladesh | Energy Procedia, ELSEVIER, 110 (2017), pp 479 – 485. | 2017 | Journal |
| 19 | M. S. Hossain, M. R. Islam, M. S. Rahman, M. A. Kader, H. Haniu | Biofuel from co-pyrolysis of solid tire waste and rice husk | Energy Procedia, ELSEVIER, 110(2017), pp. 453-458 | 2017 | Journal |
| 20 | Haniu H, Yoneyama K, Islam MR, Takai K, Obata Y, Haque ME | Vorticity dissipation associated with vortex pairing within a curved shear layer | Journal of Fluid Science and Technology. 2017;12(1):JFST0010-. | 2017 | Journal |
| 21 | Ferdous, J., Parveen, M., Islam, M. R., Haniu, H., & Takai, K | Biofuel from jute stick by pyrolysis technology | In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020088). AIP Publishing. | 2017 | Conference |
| 22 | Tuly, S. S., Parveen, M., Islam, M. R., Rahman, M. S., & Haniu, H. | Pyrolysis kinetics study of three biomass solid wastes for thermochemical conversion into liquid fuels | In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020083). AIP Publishing. | 2017 | Conference |
| 23 | Haque, M. E., Islam, M. R., Masud, M. H., Ferdous, J., & Haniu, H. | Energy consumption behavior of submersible pumps using in the Barind area of Bangladesh. | In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020039). AIP Publishing. | 2017 | Conference |
| 24 | M. E. Haque, M. R. Islam, M. H. Masud, J. Ferdous, H. Haniu | Energy Consumption Behavior of Submersible Pumps using in the Barind Area of Bangladesh | The 7th BSME International Conference on Thermal Engineering, 22 – 24 December 2016, Dhaka, Bangladesh (Published in AIP Proceedings, Vol. 1851, Issue. 1, 19th June, 2017). | 2017 | Conference |
| 25 | M. Mia, A. Islam, R. I. Rubel, M. R. Islam | Fractional Distillation & Characterization of Tire Derived Pyrolysis Oil | International Journal of Engineering Technologies-IJET, Vol.3, No.1, 2017 | 2017 | Journal |
| 26 | A. Khaleque, M. R. Islam, M. S. Hossain, M. Khan, M. S. Rahman and H. Haniu | Upgrading of Waste Tire Pyrolysis Oil to Be Used in Diesel Engine | Mechanical Engineering Research Journal. Vol. 10, pp. 35-40, 2016 | 2016 | Journal |
| 27 | M E Haque, M R Islam, M S Islam, H Haniu, M S Akhter | Life Cycle Cost and Energy Consumption Behavior of Submersible pumps using in the Barind Area of Bangladesh | International Conference on Energy and Power, 14-16 December 2016, RMIT University, Australia. | 2016 | Conference |
| 28 | M. S. Hossain, M. R. Islam, M. S. Rahman, M. A. Kader, H. Haniu | Biofuel from Co-pyrolysis of Solid Tire Waste and Rice Husk. International Conference on Energy and Power | 14-16 December 2016, RMIT University, Australia. | 2016 | Conference |
| 29 | M.A. Kader, M.R. Islam, M. Parveen, H. Haniu, K. Takai | Pyrolysis decomposition of tamarind seed for alternative fuel | Bioresource Technology, Vol.149, pp. 1-7, December 2013. | 2013 | Journal |
| 30 | Kader MA, Islam MR, Hossain MS, Haniu H | Development of a pilot scale pyrolysis plant for production of liquid fuel from waste tire | Mechanical Engineering Research Journal. 2013;9:54-9. | 2013 | Journal |
| 31 | M. R. Islam, M. N. Islam, N. N. Mustafi, M. A. Rahim and H. Haniu | Thermal recycling of solid tire wastes for alternative liquid fuel: the first commercial step in Bangladesh | Procedia Engineering, Vol. 56, pp. 573-582, 2013. | 2013 | Journal |
| 32 | Haniu H, Kim S, Kitano T, Islam MR, Miyakoshi K. | Unsteady Characteristics of Longitudinal Vortices behind a Stepped Circular Cylinder and Nonlinier Interaction | Transactions of the japan society of mechanical engineers series b. 2012;78(790):1195-205. | 2012 | Journal |
| 33 | M. R. Islam, M. Parveen, H. Haniu | Fixed bed fire tube heating pyrolysis of agricultural biomass solid waste: Jute stick is an alternative source of liquid fuels | Journal of Solid Waste Technology and Management, Vol. 38(1), pp. 58-67, February 2012. | 2012 | Journal |
| 34 | M. R. Islam, M. U. H. Joardder, S. M. Hasan, K. Takai, H. Haniu | Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology | Waste Management, Vol. 9-10, pp. 2142-9, September-October 2011. | 2011 | Journal |
| 35 | Parveen, M., Islam, M. R. and HANIU, H | Thermal decomposition behavior study of two agricultural solid wastes for production of bio-fuels by pyrolysis technology | Journal of Thermal Science and Technology, Vol. 6, No. 1, pp. 132-139; April 2011. | 2011 | Journal |
| 36 | Islam, M. R., Parveen, M. and HANIU, H | Trends of biofuels derived from renewable biomass as sustainable energy and environmental solution | In the Proceedings of the Asian Conference on Sustainability, Energy and Environment 2011 (ACSEE -2011), 2-5 June 2011, Osaka, Japan. | 2011 | Conference |
| 37 | Kader, M., Islam, M. R., & Joardder, M. U. H. | Fast pyrolysis for better utilization of tamarind seed from renewable energy point of view. | In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011). | 2011 | Conference |
| 38 | Joardder, M. U. H., Islam, M. R., Beg, M., & Alam, R | Pyrolysis of coconut shell for bio-oil. Proceedings of the WasteSafe | 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries, 13-15 February 2011, Khulna, Bangladesh | 2011 | Conference |
| 39 | Islam, M.R., Joardder, M.U.H., Kader, M.A. and Sarker, M.R | Valorization of solid tire wastes available in Bangladesh by thermal treatment. | Proceedings of the WasteSafe 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries, 13-15 February 2011, Khulna, Bangladesh. | 2011 | Conference |
| 40 | Islam, M. R., Joardder, M.U.H., Kader, M.A., Sarker, M.R.I. and HANIU, H | Valorization of solid tire wastes available in Bangladesh by thermal treatment | In the Proceedings of the WasteSafe 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries 13-15 February 2011, Khulna, Bangladesh. | 2011 | Conference |
| 41 | Islam, M.R. and Haniu, H. | Thermal Recycling of Solid Tire Wastes for Recovery of Energy and Valuable Chemicals: A Use of Fire-tube Heating Pyrolysis Reactor | Journal of Solid Waste Technology & Management, 36(3). 2010. | 2010 | Journal |
| 42 | Islam, M.R., Parveen, M. and Haniu, H. | Energy Recovery from Fixed Bed Fire Tube Heating Pyrolysis of Agricultural Waste-Jute Stick. | Journal of Solid Waste Technology & Management, 36(1). 2010 | 2010 | Journal |
| 43 | Islam, M. R., Parveen, M., and Haniu, H | Properties of sugarcane waste-derived bio-oils obtained by fixed-bed fire-tube heating pyrolysis. | Bioresource Technology, Vol. 101, No. 11; pp. 4162-4168; June 2010. | 2010 | Journal |
| 44 | Islam, M.R., Parveen, M., HANIU, H and Sharker, M. R. | Innovation in pyrolysis technology for management of scrap tire: a solution of Energy and Environment | International Journal of Environmental Science and Development, Vol. 1; No.: 1; pp. 89-96; April 2010. | 2010 | Journal |
| 45 | Islam, M. R., Haniu, H., Islam, N. M. and Uddin, M. S. | Thermochemical conversion of sugarcane bagasse into bio-crude oils by fluidized-bed pyrolysis technology | Journal of Thermal Science and Technology, Vol. 5, No. 1; pp. 11-23; February 2010. | 2010 | Journal |
| 46 | Haniu, H., Kim, S., Miyakhoshi, K., Takai, K. and Islam, M. R. | Decay of vorticity in separated shear layer | Journal of Fluid Science and Technology, Vol. 5, No. 2, Series B; pp. 331-339; February 2010. | 2010 | Journal |
| 47 | Azad, A.K., Alam, M.M. and Islam, M. R. Statistical analysis of wind gust at costal sites of Bangladesh | Statistical analysis of wind gust at costal sites of Bangladesh. | International Journal of Energy Machinery, Vol. 3, No. 1, pp. 9 – 17; August 2010. | 2010 | Journal |
| 48 | Parveen, M., Islam, M. R. and HANIU, H. | Determination of char expulsion pressure and char flow pattern in a biomass pyrolysis reactor | In the Proceedings of the 13th Asian Congress of Fluid Mechanics,17-21 December 2010, Dhaka, Bangladesh. pp. 651-654. | 2010 | Conference |
| 49 | Islam, M. R., Parveen, M., and Haniu, H | Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using fixed bed fire tube heating pyrolysis technology | In the Proceedings of the Third International Symposium on Energy from Biomass and Waste, 8-11 November 2010, Venice, Italy. | 2010 | Conference |
| 50 | Islam, M. R., Parveen, M., and Haniu, H | Characterizations of two agricultural wastes in Bangladesh as potential sources of energy: possible use of pyrolysis technology. | In the Proceedings of the Third International Symposium on Energy from Biomass and Waste, 8-11 November 2010, Venice, Italy. | 2010 | Conference |
| 51 | Parveen, M. Islam, M.R. and HANIU, H. | Determination of char expulsion pressure and char flow pattern in a biomass pyrolysis reactor. | To be published in the Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh. | 2010 | Conference |
| 52 | Islam, M. R., Parveen, M., and Haniu, H. | Energy recovery from fixed bed fire tube heating pyrolysis of agricultural waste--jute stick | In the Proceedings of 25th International Conference on Solid Waste Technology and Management (ICSW 2010). 14-17 March 2010, Philadelphia, PA, USA. | 2010 | Conference |
| 53 | Islam, M. R., Haniu, H. | Thermal recycling of solid tire wastes for recovery of energy and valuable chemicals: a use of fire-tube heating pyrolysis reactor | In the Proceedings of 25th International Conference on Solid Waste Technology and Management (ICSW 2010). 14-17 March 2010, Philadelphia, PA, USA. | 2010 | Conference |
| 54 | Islam, M. R., Haniu, H. | Thermal recycling of solid tire wastes for valorized products by fire-tube heating pyrolysis reactor | In the Proceedings of 2010 International Conference on Environmental Science and Engineering, 26-28 February, 2010, Singapore. pp. | 2010 | Conference |
| 55 | Parveen, M., Haniu, H., Islam, M. R., Islam, M. R | Advances of technology for bio-crude oils from thermochemical conversion of biomass solid wastes | In the Proceedings of the Conference on Engineering Research, Innovation and Education 2010 (CERIE 2010), 11-13 January 2010, Sylhet, Bangladesh. pp. 9-16 | 2010 | Conference |
| 56 | Miyakhoshi, K., Haniu, H., Kim, S., Takai, K. and Islam, M. R | Transitional characteristic of phase shift in lock-in phenomena of an oscillating cylinder. | Journal of Fluid Science and Technology, Vol. 4, No. 3; pp. 479-489; May 2009. | 2009 | Journal |
| 57 | Islam, M. R., Haniu, H. and Fardoushi, J. | Pyrolysis kinetics behavior of solid tire wastes available in Bangladesh | Waste Management, Vol. 29, No. 2; pp. 668-677; February 2009. | 2009 | Journal |
| 58 | Islam, M. R., Parveen, M., Islam, M. R. and Haniu, H | Technology development for bio-crude oil from pyrolysis of renewable biomass resource. | In the Proceedings of the 1st International Conference on the Developments in Renewable Energy Technology (ICDRET ’09), 17-20 December, 2009, Dhaka, Bangladesh. pp 253-256. | 2009 | Conference |
| 59 | Islam, M. R, Haniu, H., Beg, R. A. and Takai, K. | Preliminary investigation for engine performance by using tire-derived pyrolysis oil-diesel blended fuels. | Journal of Power and Energy Systems, Vol. 2, No. 6; pp. 1359-1372; December 2008. | 2008 | Journal |
| 60 | Islam, M. R, Kim, S. I., Haniu H. and Beg, M. R. A | . Fire-tube heating pyrolysis of car tire wastes: end uses of product liquids as fuels and chemicals | International Energy Journal, Vol. 9, No. 3; pp: 189-198; September 2008. | 2008 | Journal |
| 61 | Islam, M. R, Haniu, H. and Kim, S.I. | Fluid dynamics study on a cold model of fixed-bed fire-tube heating pyrolysis reactor for ejection of solid char. | Journal of Fluid Science and Technology, Vol. 3, No. 7; pp. 826-837; September 2008. | 2008 | Journal |
| 62 | Islam, M. R., Haniu, H. and Beg, M. R. A. | Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: product yields, compositions and related properties | FUEL, Vol. 87, No. 13-14; pp. 3112-3122; October 2008. | 2008 | Journal |
| 63 | Islam, M. R., Tushar, M. S. H. K. and Haniu, H. | Production of liquid fuels and chemicals from pyrolysis of Bangladeshi bicycle/rickshaw tire wastes. | Journal of Analytical and Applied Pyrolysys, Vol. 82, No. 1; pp. 96-109; May 2008. | 2008 | Journal |
| 64 | Islam, M. R., Islam, M. R. and Beg, M. R. A. | Renewable energy resources and technologies practices in Bangladesh. | Renewable and Sustainable Energy Reviews, Vol. 12, No. 2; pp. 299-343; February 2008 | 2008 | Journal |
| 65 | Islam, M. R., Haniu, H. and Beg, M. R. A. | Limonene-rich liquids from pyrolysis of heavy automotive tire wastes | Journal of Environment and Engineering, Vol. 2, No. 4; pp. 681-695; October 2007. | 2007 | Journal |
| 66 | Islam, M. R., Islam, M. R. and Beg, M. R. A | Promotion of solar energy use in Bangladesh. | International Energy Journal, Vol. 7, No. 3; pp. 299-343; September 2006. | 2006 | Journal |
| 67 | Islam, M.R., Beg, M. R. A. and Haniu, H., | Fuel based liquids from scrap tire by pyrolysis technology | In the Proceedings of 3nd BSME-ASME International Conference on Thermal Engineering, 20-22 December 2006. Dhaka, Bangladesh. Paper No.: BA-040; pp. 1-6. | 2006 | Conference |
| 68 | Islam, M.N., Islam, M.N., Beg, R.A. and Islam, M.R. | Pyrolytic oil from fixed-bed pyrolysis of municipal solid waste and its characterization. | Renewable Energy, Vol. 30, Issue 3; pp. 413-420; March 2005. | 2005 | Journal |
| 69 | Islam, M.R., Islam, M.N. and Nabi, M.N | Design, fabrication and performance studies of a biomass solid wastes pyrolysis system for alternative liquid fuel production | Journal of Energy & Environment, Vol. 3; pp. 103-117; May 2004. | 2004 | Journal |
| 70 | Islam, M.R., Islam, M.N. and Islam, M.D. | Energy recovery from organic solid wastes by thermochemical conversion technology. | In the Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004. Dhaka, Bangladesh. Vol. II, pp. 829-836. | 2004 | Conference |
| 71 | Islam, M.D., Islam, M.R. and Kenyu, O. | Comparison on heat transfer enhancement between arrays of rectangular type vortex generators and fins of same type | In the Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004. Dhaka, Bangladesh. Vol. I, pp. 186-192. | 2004 | Conference |
| 72 | Islam, M.R., Islam, M.N. and Islam, M.N. | Alternative liquid fuel by pyrolysis technology from available biomass solid wastes in Bangladesh. | Journal of Mechanical Engineering, Vol. ME 32; pp. 45-54; December 2003. | 2003 | Journal |
| 73 | Islam, M.R., Hasan, M.M. and Sarker, B.K. | Fluidization behavior of solid particles in fast pyrolysis reactor for thermochemical conversion of biomass solid wastes | Journal of Engineering & Technology, Vol. 2, No. 1; pp. 17-25; June 2003. | 2003 | Journal |
| 74 | Islam, M.R., Nabi, M.N. and Islam, M.N | The fuel properties of pyrolytic oils derived from carbonaceous solid wastes in Bangladesh | Jurnal Teknologi, No. 38(A); pp. 75-89; June 2003. | 2003 | Journal |
| 75 | Islam, M.R., Islam, M.N. and Islam, M.N. | Fixed bed pyrolysis of sugarcane bagasse for alternative liquid fuel production. | In Proceedings of the 5th International Conference on Mechanical Engineering, ICME2003, 26-28 December 2003. BUET, Paper No.: ICME03-TH-16, pp. 1-5. | 2003 | Conference |
| 76 | Islam, M.R., Islam, M.D., Firoz, M. and Choudhury, O.F.M.M.I. | Aerodynamics and performance study of a V-shaped three bladed Savonious rotor. | In proceedings of the 7th Asian International Conference on Fluid Machinery, AICFM7, 7-10 October 2003. Fukuoka, Japan. Paper No.: 20004, pp. 1-5. | 2003 | Conference |
| 77 | Islam, M.D. Islam, M.R. and Choudhury, S.K. | Design, fabrication and performance study of a parabolic trough concentrator (PTC) solar cooker using thermic fluid | In Proceedings of the 3rd International Conference of Mechanical Engineers & 8th Annual Paper Meet on E-manufacturing ICME2003, IEB, 20-22 March 2003. Paper No.:15, pp. 105-116. | 2003 | Conference |
| 78 | Islam, M.R. Hasanuzzaman, S. and Motin, M.A. | Development of an economic heating system for fluidized bed micro-pyrolyzer | In Proceedings of the 3rdInternational Conference of Mechanical Engineers & 8th Annual Paper Meet on E-manufacturing ICME2003, IEB, 20-22 March 2003. Dhaka Center, Bangladesh. Paper No.: 16, pp. 117-126. | 2003 | Conference |
| 79 | Islam, M.R., Islam, M.N. and Nabi, M.N. | Bio-crude-oil from fluidized bed pyrolysis of rice-straw and its characterization | International Energy Journal, Vol. 3, No. 1; pp. 1-11; June 2002. | 2002 | Journal |
| 80 | Islam, M.R., Rafy, M.M., Ahmed, S. and Syfullah, A.Z.A., | Development of efficient cooking system for traditional biomass fuel in Bangladesh. | In Proceedings of the BSME-ASME International Conference on Thermal Engineering, 31 December 2001-2 January 2002, Dhaka, Bangladesh. pp. 585-591. | 2002 | Conference |
| 81 | Islam, M.R., Ahmed, R., Ahsan, S.M.S. and Islam, M.N. | Hydrodynamic studies of fluidized bed cold model reactor for thermal conversion of biomass solid waste | In Proceedings of the BSME-ASME International Conference on Thermal Engineering, 31 December 2001-2 January 2002. Dhaka, Bangladesh. pp. 592-598. | 2002 | Conference |
| 82 | Islam, M.R., Nabi, M.N. and Islam, M.N. | Characterization of biomass solid wastes for liquid fuel production. | In Proceedings of the 4th International Conference on Mechanical Engineering, ICME2001, 26-28 December 2001. BUET, Vol. 2 pp. I 77-82. | 2001 | Conference |
| 83 | Islam, M.R., Islam, M.N., and Nabi, M.N. | Design of a fluidized bed pyrolysis system for thermochemical conversion of biomass solid waste into liquid fuel. | In Proceedings of the 2nd International Conference & 7th Annual Paper Meet of the Mechanical Engineering Division, IEB, 25-27 October 2001. Paper No.: 20, pp. 162-171. | 2001 | Conference |
| Phd Students | |||
| Id | Name | Thesis work | Current Position |
| 1304102002 | Md. Emdadul Haque | Development of an energy saving submersible pumping system for Barind Tract of Bangladesh. | Awarded in October, 2020 |
| 1304102001 | Md. Samim Hossain | Production of alternative liquid fuels from organic solid wastes available in Bangladesh by pyrolysis technology and their application in combustion systems | Continuing |
| Masters Students | |||
| Id | Name | Thesis work | Current Position |
| 1004102004 | Md. Samim Hossain | Improved utilization of by-product char obtained from pyrolysis conversion of solid tire wastes into liquid fuels | Awarded in April, 2013 |
| 0904102012 | Barun Kumar Das | Design, fabrication and performance evaluation of a downdraft woody gasifier for syngas production | Awarded in May, 2020 |
| 1404102014 | Jannatul Ferdous | Production of liquid fuel from co-pyrolysis of plastic and polythene wastes | Awarded in August, 2019 |
| 1004102003 | Md. Harun Or Rashid | Design and Economic Analysis of Environment Friendly Hybrid Power System. | Continuing |
| 1204102020 | Farzana Nahid | Production and Characterization of Pyrolysis Oil from Waste Plastic. | Continuing |
| 0904102006 | Md. Abdul Kader | Development of self-sufficient pyrolysis system for production of alternative liquid fuel from organic solid wastes | Awarded in 2013 |
| 1004102001 | Md. Shahid Reza | Characterization and upgrading of product liquids obtained from the first commercial scale tire wastes pyrolysis plant in Bangladesh | Awarded in 2014 |
| 1804102005 | Md. Sanowar Hossain | Energy consumption behaviour analysis and improvement of energy efficiency of submersible pump used in Barind Track of Bangladesh | Continuing |
| Undergraduate Students | |||
| Id | Name | Thesis work | Current Position |
| Activity | Description |
|---|